نتائج التوجيهي 2021 فلسطين

هندسة الكمبيوتر Computer Engineer يشتمل هذا القسم على كل ما يتعلق بتخصص هندسة الحاسوب ,هندسة كمبيوتر ,برمجيات ,computer engineer ,software,hardware,programming,Networks,Security,Tools,Systems,technology

Block Teamviewer Using TMG 2010 | UnBlock Teamviewer Using TMG 2010 | Permit Teamviewer Using TMG 2010 | Allow Teamviewer Using TMG 2010

الصورة الرمزية م.ابن فلسطين
تاريخ الإنضمام: 092006
رقم العضوية : 2
الدولة : فلسطين الحبيبة
المشاركات: 3,696
قديم 05-05-2011, 03:15
المشاركة 1
نشاط م.ابن فلسطين
  • قوة السمعة : 206
    افتراضي Block Teamviewer Using TMG 2010 | UnBlock Teamviewer Using TMG 2010 | Permit Teamviewer Using TMG 2010 | Allow Teamviewer Using TMG 2010
    block, permit, teamviewer, unblock



    Many of systems Administrator using TMG 2010 and some times you need to block some sites ,application and ports due to security or policy issue.


    In this article we need to know how we block / unblock the teamviewer using TMG 2010.


    First of all we need to know how is the teamviewer work and what port its used for working?


    1- TeamViewer use TCP 5938 port.
    2- TeamViewer uses the follwing sites :
    http://dyngate.com
    http://teamviewer.com


    Now we need to know how we can block / unblock the teamviewer using TMG 2010.

    Block Teamviewer Using TMG 2010


    Note: by defualt the eamviewer is blocked in TMG.


    1-
    You need to add a rule which blocks port 5938 from Internal to External.



    open forefront TMG console ==> right click on firewall Policy ==> New ==> Access Rule ==>

    write the name of the rule as example Blocking Teamviewer ==> Deny ==> Choose Selected protocol ==>

    then you must add new protocol TCP and put inside it port
    5938 Direction OutBound ==> from Internal to External or as your topology in you network.





    2-
    You need to add
    another one which blocks HTTP / DNS / HTTPS from Internal to a URL set which contains http://*.teamviewer.com andhttp://*.dyngate.com).



    you need now to add the following HTTP URL set inside any rule and make it deny:

    http://*.dyngate.com/*

    http://*.teamviewer.com/*



    and now go to any client and try to start the teamviewer it should be Failed Block Teamviewer Using 2010 UnBlock.



    UnBlock Teamviewer Using TMG 2010


    now we need to unblock the teamviewer so we need only to allow all the steps that i mentioned in the block teamviewer.


    if you need any further help dont hesitate to contact us and we will answer you.





    اضافة رد

    مواقع النشر (المفضلة)

    الكلمات الدلالية (Tags)
    block , permit , teamviewer , unblock

    أدوات الموضوع

    الساعة الآن 12:25.
    الملتقى غير مسؤول عن أي اتفاق تجاري أو تعاوني بين الأعضاء
    التعليقات المنشورة لا تعبر عن رأي ملتقى طلاب فلسطين ولا نتحمل أي مسؤولية قانونية حيال ذلك (ويتحمل كاتبها مسؤولية النشر)

    جميع الحقوق محفوظة لملتقى طلاب فلسطين
    •  
    •  
    •  
    Powered by vBulletin® Version 3.8.8
    Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.